Behringer SYSTEM 55 Complete Modular Synthesizer with 38 Modules, MIDI-to-CV Converter and EURORACK GO case

The Behringer SYSTEM 55 brings you a pre-assembled modular synthesizer with 38x vintage-sounding modules from the ’70s. The SYSTEM 55 is an amazing musical tool for those who want the ultimate modular synthesizer capable of fully scoring that next cyberpunk or sci-fi movie from start to finish.

Accepting Orders

$2999
Add to Quote
Shipping Info
Order Online for Delivery
Backorder
Web
Online Backorder
Backorder
VIC
Dandenong Backorder
Backorder
VIC
Richmond Backorder
Backorder
VIC
Ringwood Backorder
Backorder
NSW
Artarmon Backorder
Backorder
NSW
Smithfield Backorder
Backorder
QLD
Mansfield Backorder
Backorder
WA
Malaga Backorder
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Behringer SYSTEM 55 Complete Modular Synthesizer with 25 Modules

The Behringer SYSTEM 55 brings you a pre-assembled modular synthesizer with 38x vintage-sounding modules from the ’70s. The SYSTEM 55 is an amazing musical tool for those who want the ultimate modular synthesizer. It is fully capable of scoring that next cyberpunk or sci-fi movie from start to finish. This neat package will give you all the amazing modular synths so you can create amazing music right out of the box. Furthermore, you don’t even have to worry about power as the included EURORACK GO cases come with their own PSUs (Power Supply Unit).

Whether you’re just getting into modular synths or looking to complete your collection, the SYSTEM 55 modular synthesizer from Behringer is a great tool to have when creating amazing music.

Intricate Patches and Hours of Experimentation

This entire setup comes equipped with a 914 FIXED FILTER BANK. It features 12x active bandpass filters ranging from 125 Hz to 5.6 kHz. It also features additional Low Pass and High Pass filters. The 923 FILTER MODULE with separate Low and High Pass filters; each with its own dedicated frequency cutoff controls and jacks for both pink and white noise. But that’s only the beginning. The SYSTEM 55 comes with so many more modules, you’re sure to have hours of fun creating beats that you can just lose yourself in.

The SYSTEM 55 features five 902 VOLTAGE CONTROLLED AMPLIFIERS with three summed CV inputs and dual audio inputs and outputs. Each module also comes with a rocker switch that allows you to toggle between linear and logarithmic response modes while you can manually set the control voltage with the Fixed Control Voltage knob. The SYSTEM 55 also comes with four 911 ENVELOPE GENERATORS allowing you to create a deeply contoured signal with each of their 4 independent controls for Attack (T1), Decay (T2), Release (T3) and Sustain times from 2 ms up to 10 seconds. Create snappy and percussive sounds or long evolving drones. It’s also perfect for funky grooves or a brooding soundtrack to your latest techno-thriller.

Step sequencer

A step sequencer has always been at the heart of every synthesizer setup, so Behringer of course had to include one. The 960 SEQUENTIAL CONTROLLER is an 8-step sequencer with 3 rows of CV controls for adjusting the pitch of a signal at that stage. An additional 9th step can also be used to stop the sequence. More variations can be achieved by switching any of the desired Stage Mode Switches to Normal, Skip or Stop. You can even manually trigger each stage by pressing the respective Set button.

The included 962 SEQUENTIAL SWITCH module will transform the 960 from an 8-step sequencer to a 24-step giant capable of more intricate sequences and beats.

Adding even more flexibility to the SYSTEM 55; the 961 INTERFACE module converts V-trig to S-trig and vice versa and can even convert any audio source you plug into a V-trig to drive other modules in your setup. The 903A RANDOM SIGNAL GENERATOR provides 2x white and pink noise sources so you can patch to other modules in SYSTEM 55.

The SYSTEM 55 also comes with a 992 CONTROL VOLTAGES MODULE. This allows you to mix and switch control voltages, 904B HIGH PASS FILTER and 904A VOLTAGE CONTROLLED LOW PASS FILTER and a CM1A MIDI-to-CV converter. As a result, you can control the SYSTEM 55 with a MIDI keyboard, sequencer or DAW, to truly round out this rig. There are also a few blank panels in case so you can expand the SYSTEM 55 with even more modules.

Modules included with the SYSTEM 55

  • 914 Fixed Filter Bank (FFB)
  • 923 Filters and Noise Sources
  • 904B High Pass Filter (HPF)
  • 904A Low Pass Filter (LPF)
  • 992 Control Voltages
  • (5x) 902 Voltage Controlled Amplifiers (VCA)
  • (4x) 911 Envelope Generators (EG)
  • 911A Dual Trigger Delay (DTD)
  • (2x)  921A Oscillator Driver
  • (6x) 921B Voltage Controlled Oscillators (VCO)
  • 921 VCO/LFO
  • 960 Sequential Controller
  • CM1A – MIDI interface
  • (3x) CP3A – O
  • (3x) CP3A – M
  • (2x) 995 Attenuators
  • 903A Random Signal Generator
  • CP35 Attenuator / Voltage Source / Multiple
  • 961 Interface
  • 962 Sequential Switch

 

The SYSTEM 55 is also available as a SYSTEM 15 (with 16 Modules) and SYSTEM 35 (with 25 Modules).

  • Pre-assembled ”SYSTEM 55“ modular synthesizer with 38 vintage-sounding modules from the ’70s
  • 1x 914 FIXED FILTER BANK with 12 active bandpass filters ranging from 125 Hz – 5.6 kHz and LP/HP filters
  • 1x 923 FILTERS modules with 6 dB low and high pass filters and white/pink noise sources
  • 1x 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 1x 904A VOLTAGE CONTROLLED LOW PASS FILTER
  • 1x 992 CONTROL VOLTAGES module allows CV mixing and switching with 1 inverting attenuator
  • 5x 902 VOLTAGE CONTROLLED AMPLIFIER with 3 summed CV inputs and dual audio inputs and outputs
  • 4x 911 ENVELOPE GENERATORS with S-trig inputs and CV outputs
  • 1x 911A DUAL TRIGGER DELAY module with S-trig input and output
  • 2x 921A OSCILLATOR DRIVER with 6x 921B VCOs and 1x 921 VCO gives you 7 fully-featured voices
  • 1x 960 SEQUENTIAL CONTROLLER module provides up to 24-step sequences in 8 steps with 3 rows
  • 1x CM1A MIDI to CV converter enables control by MIDI keyboards or DAW, V-trig or S-trig outputs
  • 3x CP3A-O module allows CV mixing and switching for the VCOs with 1 attenuator
  • 3x CP3A-M 4 input mixer with master level, 4 outputs and 2 sets of 4 multiples
  • 2x 995 ATTENUATORS modules with 3 linked passive attenuators
  • 1x 903A RANDOM SIGNAL GENERATOR module provides dual white and pink noise sources
  • 1x CP35 ATTENUATORS module with 4 linked attenuators, 2 sets of 4 multiples and reference voltages
  • 1x 961 INTERFACE module converts multiple V-trig to S-trig for compatibility with other Eurorack modules
  • 1x 962 SEQUENTIAL SWITCH module expands the 960 modules into a 24 step sequencer
  • 1x BP28, 2x BP56 and 2x BP2 blanks panels for a total of 144HP expansion space
  • 1x CM1A MIDI-to-CV converter enables control via MIDI keyboards or DAW, V-trig or S-trig outputs
  • 2x EURORACK GO cases including PSUs
  • 2x EURORACK GO BRACKETS to link the 2 EURORACK GO cases together for easy patching

Voltage Control (pitch)

Source: Destination

External MIDI Keyboard – MIDI Out: CM1A MIDI Interface MIDI In

CM1A CV Output: 921A Frequency Input

21A Frequency Output: 921B Frequency Link (in series)

 

Audio

921B Waveform Outputs (three of four): CP3A-M Inputs

CP3A-M Output: 904A Signal Input

904A Signal Output: 902 Signal Input

902 Signal Output: Your mixer/amplifier/DAW

 

Voltage Control (amplitude)

CM1A s-trigger Output: Multiple

Multiple Output (three of): 2 x 911 s-trigger Input & 911A s-trigger Input

911A Output: 3rd 911

1st 911 Output: 1st 902 Control Input

 

Voltage Control (modulation)

2nd 911 Output: 904A Control Input

921 Aux Sine Output: 2nd 902 Signal Input

2nd 902 VCA Signal Output: CP3A-O Input 4

CP3A-O Outputs: 921B DC Mod Input (three of )

3rd 911 Output: 2nd 902 Control Input

For more information, please visit the manufacturer's website.