Behringer 1047 Multimode Filter Resonator Module

$159

SKU: 1047MULTI Categories: , , Tags: ,

The Behringer 2500 Series Multimode Filter/Resonator Module 1047 brings you an authentic reproduction of System 2500 circuity.

Order in

Add to Quote
Shipping Info
Buy it now, up to 6 months interest free
Available at any of our 6 store locations. Find out how
Order-in Products

Please note: This item is an Order-in item & stock is not kept on hand.

Once your order is placed you will be contacted with an ETA on your item as soon as possible.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match

Behringer 1047

The Behringer 2500 Series Multimode Filter/Resonator Module 1047 brings you an authentic reproduction of System 2500 circuity. At an incredibly affordable price, the 1047 Multimode Filter Resonator Module is perfect to add to an existing rig, or start a new modular synth.

Firstly, the 1047 includes a classic voltage controlled 12 dB per octave state-variable filter; the 1047 is a matched transistor design for a vintage sound. It’s also equipped with coarse and fine filter frequency controls; a resonance control on al 4 filter outputs; a resonance limit switch to prevent signal overload; notch frequency/fc control; 2 summed frequency CV attenuators; as well as a resonance (Q) CV attenuator for maximum flexibility. The signal input on the 1047 is also equipped with an attenuator for endless possibilities.

Ins and Outs

The 1047 gives you comprehensive connectivity, filter signal input, FCV 1 and FCV 2 inputs can be used for filter frequency control or modulation, the Q CV input allows modulation of Q and resonance. The independent low-pass, high-pass, band-pass and notch filter outputs are all available simultaneously to feed multiple filter signals to other modules.

Eurorack Ready

Finally, its super easy to install the 1047 multimode filter/resonator module because it fits neatly into a standard Eurorack case. So just connect the power cable to the power supply, screw in the module, and you’re ready to go. Allowig you to create a truly unique setup with other synth modules!

  • Classic-sounding 1047 analog multi-mode filter and resonator module from the ’70s
  • Authentic reproduction of the circuitry from the “2500” Series
  • Consists of a highly resonant 12 dB state-variable filter capable of proving a wide variety of formant shaping and tonal modulation
  • Filter simultaneously provides high-pass, band-pass, low-pass and notch outputs
  • Coarse and fine controls adjust the cut-off frequency of the filter from 16 Hz to 16 kHz with 2 external control signal inputs and attenuators
  • Resonance (Q) control adjusts the level of the resonant peak from 0 to 512 with an external control signal input and attenuator
  • Keyboard percussion feature allows the filter to generate a wide range of percussive sounds
  • A keyboard gate signal is connected to the external input with a keyboard CV connected to a frequency control input
  • Striking a key will create percussive sounds when the Keyboard Percussion mode is activated
  • When the keyboard is released the filter tone damps at a rate determined by Final Q
  • Eurorack specs: 16 HP, XX mA +12 V, XX mA -12 V

Input Type: 1 x 3.5 mm TS jack, DC coupled

Impedance: 50 kΩ, unbalanced

Max input level: +18 dBu

Frequency CV input 1:

Type: 1 x 3.5 mm TS jack, DC coupled

Impedance: 50 kΩ, unbalanced

Max input level: ±10 V

CV scaling: 1 V/oct.

Frequency CV input 2:

Type: 1 x 3.5 mm TS jack, DC coupled

Impedance: 50 kΩ, unbalanced

Max input level: ±10 V

CV scaling: 1 V/oct.

Q CV input

Type: 1 x 3.5 mm TS jack, DC coupled

Impedance: 50 kΩ, unbalanced

Max input level: ±10 V

CV scaling: 1 V doubles the Q factor

Outputs

Filter outputs (LP / HP / BP / Notch)

Type: 4 x 3.5 mm TS jack, DC coupled

Impedance: 1 kΩ, unbalanced

Max output level: +18 dBu

Controls: Coarse frequency, 1 x rotary knob, 31 Hz to 8 kHz

Fine frequency: 1 x rotary knob, x1/2 to x2

Resonance (Q): 1 rotary knob, Q = 0.5 to >256

Resonance (Norm / lim): 2-way sliding switch Normal / limiting, switchable

Frequency CV: 1 / 2 attenuators, 2 x rotary knob, -∞ to unity gain

Q CV attenuator: 1 x rotary knob, -∞ to unity gain

Input attenuator: 1 x rotary knob, -∞ to unity gain

Notch frequency/fc: 1 x rotary knob, ±3 octave range

Power

Power supply: 55 mA (+12 V), 45 mA (-12 V)

For more information, please visit the manufacturer's website.