Samson RL112A Powered 12-Inch Speaker 800W


The Samson RL112A gives you a powered 800W 2-Way 12″ PA speaker with an advanced Class D amplifier. Weighing in at just 15kg, the RL112A is the perfect solution for DJs, lectures, meetings, and events.

Out of stock

Order Online for Delivery
or visit any of our 6 showrooms to purchase your items.
(Stock availabilities below)
Out of stock
Online Out of stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Samson RL112A

The Samson RL112A gives you a powered 800W 2-Way 12″ PA speaker with an advanced Class D amplifier. Weighing in at just 15kg, the RL112A is the perfect solution for DJs, lectures, meetings, and events. Not to mention it’s great for singer-songwriters performing on the road or at local venues.

In a Class by Itself

Thanks to Class D amplification, the RL112A gives you plenty of power from its lightweight chassis. While its unique bi-amp design hosts two separate power amps. Including one to drive the huge low end, as well as another that delivers warm & smooth high frequencies. Combined, the RL112A delivers 800W of peak power. So there’s more than enough headroom in the audio signal to prevent distortion.

On top of that, internal circuitry gives you both thermal and overload protection. As well as a compressor and optical-based limiter that keeps everything running smoothly.

Loud and Clear

With its 12″ extended-range low-frequency driver, RL112A gives you a tight & punchy bass. While the 2″ voice coil is more efficient and maximizes heat dispersion. At the top of the speaker is another 1″ high-frequency driver with a 1″ voice coil. Using neodymium magnets, the RL112A is more efficient, clear, and intelligible. There’s also a moulded 90° x 60° high-frequency horn for incredible high-frequency dispersion and coverage.

All Are Welcome

Furthermore, you’ll find a 2 channel mixer onboard the RL112A. The first channel featuring a XLR/1/4″ combo jack with a gain-matching mic/line switch. While Channel 2 is entirely dedicated to receiving the signal from a Samson XPD wireless microphone. So it’s the perfect choice for events where you need to get on the mic and make a speech or performance. Individual volume knobs allow you to set the perfect levels, while the Mix Out jack passes the combined signal to any additional equipment you might have. Switch on the Contour (EQ) circuit and enhance the sound when you need to.

Born to Run

Finally, the Samson RL112A is housed in impact-resistant polypropylene cabinets with perforated metal grills. Adding even more protection to these heavy-duty speakers while allowing you to use them either vertical or horizontal, depending on your application. There are also three easy-carry handles on either side to ensure convenient transport and placement. A convenient 1 3/8″ pole-mount socket is built right in.

  • Lightweight Class D 2-way active loudspeaker
  • 800 watts Peak/400 watts RMS of power
  • 12″ extended range low-frequency driver with 2″ voice coil
  • 1″ neodymium high-frequency driver
  • Selectable Mic/Line XLR-1/4″ combo input with independent volume control
  • XPD Wireless port for use with Samson XPD Series USB Digital Wireless Systems (sold separately)
  • XLR Mix output for daisy-chaining additional speakers
  • Signal/Limit indicator
  • Contour switch for popular DJ/music playback EQ
  • 4-point electronic protection circuitry
  • Solid polypropylene enclosure with impact-resistant design
  • The full perforated metal grille protects all speaker components
  • Three large ergonomic carry handles
  • Integrated 1 3/8″ speaker stand mount
  • Floor monitor positioning options

Output Power (1kHz): 800 watts Peak (700 LF + 100 HF), 400 watts RMS (350 LF + 50 HF)

LF Driver: 12″ woofer, 2″ voice coil

HF Driver: 1″ neodymium tweeter, 1″ voice coil

Frequency Response: 58Hz–20kHz

Max. SPL (1M): 120dB

Limiter: Optical (electronic clip)

Horn Coverage: 90°H x 60°V

Crossover Frequency: 2.5KHz at 12dB/Oct

Inputs: Balanced Mic/Line XLR-1/4″ combo, XPD Wireless

Output: Balanced XLR Mix output

Contour Equalization: 100Hz and 12kHz Boost

Electronic Protection: Thermal, Overload, Analog Limiter, Compressor

Power Consumption: 420W

AC Connector: 3-pin IEC 250 VAC, 20 A male

Fuse: 110–120V  T6.3A AC250V, 220–240V  T3.15A AC250V

Enclosure: Polypropylene, metal grille, rubber feet, three carry handles, 1 3/8″ speaker stand mount

Dimensions: 381 x 328 x 607 mm

Weight: 13.8kg

For more information, please visit the manufacturer's website.