• Online Stock In Stock
  • Updating stores stocks...
Price Match


Neumann KH 750 DSP

The Neumann KH 750 DSP is a compact 10″ studio subwoofer ideal for smaller rooms and studios. With unique and flexible 2.0/0.1 Bass Manager allowing the subwoofer to be used in many different system configurations. On the back panel, there are analog and digital inputs and outputs, four routing modes and adaptable acoustical controls to allow for seamless system integration. The Neumann. Control software gives access to many additional functions inside the subwoofer. The KH 750 DSP can be used in music, broadcast, and post-production studios for tracking, mixing and mastering.

The newly designed 10” long-throw driver has a large magnet, linear motor design and a very stiff pressed steel basket. As subwoofers are usually placed on the floor, a robust grille protects the driver from accidental damage. The well-braced cabinet is a sealed designed which brings the fastest possible transient response. The two analog XLR inputs are balanced as are the two analog XLR outputs. The 192 kHz / 24-bit digital input can accept AES3 and S/P-DIF signals. There is a bypassable standby function and the switch-off time can be adjusted in Neumann.Control.


Remark: At the moment, the KH 750 DSP can only be remotely controlled by the Neumann.Control App in combination with the KH 80 DSP.

Via standard IP networking, Neumann.Control gives access to many additional the functions of the KH 750 DSP Subwoofer. Systems of loudspeakers can be defined, from mono to 3D, aligned for a good in-room sound, and then operated centrally: Setup, Align, Operate. At last, you do not have to be an expert to optimally integrate this subwoofer into your system, even in a small room.
Neumann.Control for iPad®

The Neumann.Control app for iPad® offers several features allowing you to set up, align and operate the KH 750 DSP and KH 80 DSP even in large setups up to 9 loudspeakers.

  • 10″ DSP Powered Subwoofer
  • Designed for Small Rooms & Monitors
  • 18 to 300 Hz Response
  • Can Handle up to 105 dB SPL
  • Integrates with Neumann Monitors
  • Ethernet Control over Alignment & Setup
  • Low-Pass Filtering, 180° Phase Inversion
  • Analog XLR & BNC-AES I/O
  • For LFE or Sub Channels


Type: Powered

Speaker Size: 10″

Driver Type: Long-throw with Pressed-steel basket

Total Power: 256W

Frequency Range: 20Hz-300Hz

Crossover Frequency: 80Hz

Maximum Peak SPL: 105 dB SPL @ 1m

Input Types: 2 x XLR

Output Types: 2 x XLR

Other I/O: AES3 In/Out (digital)

Dimensions: 383 x 330 x 383 mm

Weight: 19.5 kg


For more information, please visit the manufacturer's website.