Headrush FRFR112MK2 2500W 12 Inch Powered Guitar Speaker

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modelling pedals and pedalboards, as your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound.

Order-In

Add to Quote
Shipping Info
Order-In Products

Please note: Some item(s) in your order are Order-In item(s) and stock is not kept on hand.

Once your order is placed you will be contacted with an ETA on your item as soon as possible.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Headrush FRFR112MK2 2500W 12 Inch Powered Guitar Speaker

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp-modelling pedals and pedalboards. Your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound.

The Headrush FRFR112MK2 is precision-designed to get the most out of your modeller. It delivers all the intricacies of your amp and cab emulations, with enough volume to be ready for any scenario.

Pure and Powerful Tone

FRFR-112 MKII outputs a massive 2500 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 12-inch woofer and high-frequency compression driver, the FRFR-112 delivers a precise, full response. It does so across the entire frequency range, without any artificial colouration.

This is critical to getting the most out of your amp modeller. The FRFR112MK2’s performance is exceptional, with max 131dB SPL and 46-22kHz frequency range.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding. This is because lower frequencies from different instruments battle each other. FRFR112MK2 has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfectly in the mix. Unwanted electrical noise can also be a common problem. FRFR112MK2’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

Road-Ready Lightweight Design

FRFR112MK2 is tough yet relatively lightweight and easy to transport (15.8kg) making one trip load-ins at the gig or rehearsal space easier than ever.

While you can use FRFR112MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

FRFR112MK2 Key Highlights:

  • Powerful, Professional Sound – 2500 watts of peak power
  • Precision-Tuned for Amp Modelers
  • Bluetooth® Enabled
  • Powerful, Professional Sound – 2500 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal
  • Precision-Tuned for Amp Modelers – The cabinet design, 12” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations
  • Bluetooth® Enabled – Stream music wirelessly from your mobile device into FRFR-112 MKII’s dedicated Bluetooth® channel
  • All the Connectivity You Need – Two combo XLR + 1/4″ inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix
  • Quickly Adapts to Venues and Rooms – FRFR-112 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
  • Lightweight, Flexible and Sturdy – Weighing just 34.7lbs / 15.7kg, FRFR-112 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position

Output Power:
2500 W

Drivers:

Low-Frequency: 12.0” (305 mm) driver, 2.5” (63 mm) high-temperature voice coil.

High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.

Crossover Frequency:
2 kHz

Maximum SPL:
132 dB (peak) dB-SPL @ 1 m

Frequency Response:
53 Hz – 20 kHz (+/-3 dB)

Frequency Range:
44 Hz – 20 kHz (-10 dB)

Horn Coverage:
90° horizontal x 60° vertical (nominal)

Connectors:

  • (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)
  • (1) XLR output (Link)
  • (1) IEC power cable input

Input Impedance:

Line: 10 KΩ balanced, 20 KΩ unbalanced

Gain/Volume Control Range:

-∞ to 0 dB, +4 dBu nominal, +10 dBu for max output

HPF Switch:
100 Hz

Bluetooth:

Version: 5.0

Profile: A2DP, AVRCP

Codec: SBC

Range: up to 100 feet (30.5m)

Power:

Connection: IEC

Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz

Consumption: 1100W

Fuse: T15AL AC250V; 220-240V T6.3AL AC250V

Protection:
Electronic clip, thermal, and transducer overdrive protection

Mounting/Installation:
Standard 36 mm pole socket

Operating Temperature:
14°F to 113°F (-10°C to 45°C)

Dimensions:
351 mm x 354 mm x 607 mm

Weight:
15.7 kg

For more information, please visit the manufacturer's website.