Headrush FRFR108MK2 2000W 8 Inch Powered Guitar Speaker

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp modelling pedals and pedalboards, as your amplifier needs to sound pure and transparent.

Accepting Orders

$519
Add to Quote
Shipping Info
Order Online for Delivery
Backorder
Web
Online Backorder
Backorder
VIC
Dandenong Backorder
Backorder
VIC
Richmond Backorder
Backorder
VIC
Ringwood Backorder
Backorder
NSW
Artarmon Backorder
Backorder
NSW
Smithfield Backorder
Backorder
QLD
Mansfield Backorder
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Headrush FRFR108MK2 2000W 8 Inch Powered Guitar Speaker

If you’re new to FRFR amplifiers FRFR stands for “full-range flat-response.” This special type of amplification is very important for amp-modelling pedals and pedalboards. Your amplifier needs to sound pure and transparent, so it can deliver a true “amp in the room” sound.

In fact, the Headrush FRFR108MK2 will precisely get the most out of your modeller. It delivers all the intricacies of your amp and cab emulations, with enough volume to be ready for any scenario.

Pure and Powerful Tone

FRFR-108 MKII outputs a massive 2000 watts, which means you have enough headroom for almost any performance or rehearsal. Featuring a specially voiced 8-inch woofer and high-frequency compression driver, the FRFR-108 delivers a precise, full response. It does this across the entire frequency range, without any artificial colouration. This is critical to getting the most out of your amp modeler.

Above all, the Headrush FRFR108MK2’s performance is exceptional, with max 129dB SPL and 46-22kHz frequency range.

Adapts to Any Stage or Room

Stages and rehearsal rooms can easily become dense and muddy sounding. That’s because lower frequencies from different instruments battle each other; FRFR108MK2 has a HPF cut switch to quickly pull those troublesome frequencies out and make sure your tone sits perfect in the mix. Unwanted electrical noise can also be a common problem; FRFR-108 MKII’s ground lift switch can eliminate hums and buzzes resulting from ground loops.

Road-Ready Lightweight Design

FRFR108MK2 is tough yet lightweight and easy to transport (9.53 kg) making one trip load-ins at the gig or rehearsal space easier than ever.

While you can use FRFR108MK2 in its intended wedge position, its versatile design means that it can also be used in an upright or pole-mounted position, making it easier to direct your sound wherever you need it, which is especially helpful at outdoor gigs or other places where PA backline is limited.

FRFR108MK2 Key Highlights:

  • Powerful, Professional Sound
  • Precision-Tuned for Amp Modelers
  • Bluetooth® Enabled
  • Powerful, Professional Sound – 2000 watts of peak power ensures you have enough headroom for almost any live performance or rehearsal
  • Precision-Tuned for Amp Modelers – The cabinet design, 8” woofer, and HF compression driver are specially voiced for accurate, linear delivery of amplifier and cabinet emulations
  • Bluetooth® Enabled – Stream music wirelessly from your mobile device into FRFR-108 MKII’s dedicated Bluetooth® channel
  • All the Connectivity You Need – Two combo XLR + 1/4″ inputs with independent volume controls and an XLR direct output allow for chaining speakers or sending to a front-of-house mix
  • Quickly Adapts to Venues and Rooms – FRFR-108 MKII has a ground lift switch for eliminating noise issues caused by ground loops and a HPF EQ switch to help cut through muddy stage mixes
  • Lightweight, Flexible and Sturdy – Weighing just 21lbs / 9.53kg, FRFR-108 MKII is rugged yet easy to transport and can be used in a wedge, upright, or pole-mounted position

Output Power:
2000 W

Drivers:

Low-Frequency: 8.0” (203 mm) driver, 2.0” (50 mm) high-temperature voice coil.

High-Frequency: 1.0” (25 mm) exit ceramic driver with 1.4” (35 mm) coil.

Crossover Frequency:
2 kHz

Maximum SPL:
130 dB (peak) dB-SPL @ 1 m

Frequency Response:
62 Hz – 20 kHz (+/-3 dB)

Frequency Range:
52 Hz – 20 kHz (-10 dB)

Horn Coverage:
90° horizontal x 60° vertical (nominal)

Connectors:

(2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced)

(1) XLR output (Link)

(1) IEC power cable input

Input Impedance:

Line: 10 KΩ balanced, 20 KΩ unbalanced

Gain/Volume Control Range:

-∞ to 0 dB, +4 dBu nominal, +10 dBu for max output

HPF Switch:
100 Hz

Bluetooth:

Version: 5.0

Profile: A2DP, AVRCP

Codec: SBC

Range: up to 100 feet (30.5m)

Power:

Connection: IEC

Input Voltage: 100-120V, 50/60 Hz; 220-240V, 50/60 Hz

Consumption: 1100W

Fuse: T15AL AC250V; 220-240V T6.3AL AC250V

Protection:
Electronic clip, thermal, and transducer overdrive protection

Mounting/Installation:
Standard 36 mm pole socket

Operating Temperature:
14°F to 113°F / -10°C to 45°C

Dimensions:
10.1” x 9.6” x 17.2”
256 mm x 245 mm x 436 mm

Weight:
21.05 lbs.
9.5 kg

For more information, please visit the manufacturer's website.