A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-10x E in to the top slot of your rack, and the ten switched outlets in the rear panel will power up and protect all your equipment up to a 10-amp load.
Furman M-10X E Power Conditioner (OPEN BOX)
$199
B-Stock Condition Report
| Condition: Good | Original Box: Yes |
| Comments: Box Slightly Damaged from Shipping | Accessories: Power Cable |
The Furman M-10X E is a professional ‘rack-mountable’ power conditioner designed to provide spike / surge protection, and AC noise filtering. The M-10X E features 1 in / 11 out power sockets.
Discontinued
Discontinued Products
Please note: This product has been discontinued.
Shipping Calculator
- AC Noise filtering to reduce radio frequency and electromagnetic interference.
- Power spike & surge protection
- 11 IEC power outlets
- 10 Amp rating
- ‘Protection OK’ indicator LED
| Max Output Current: | 10 Amps |
|---|---|
| Line Cord: | 1.5m removable IEC |
| Operating Voltage: | 230 VAC 50Hz |
| Spike Protection Mode: | Line to Neutral |
| Energy Dissipation: | 305 joules |
| Peak Impulse Current: | 12,000 Amps |
| Max Operating Voltage: | 650 Volts (continuous) |
| Noise Attenuation: | Transverse mode: Greater than 20dB, 1.5MHz to 200 MHz |
| Dimensions: (HxWxD) | 44.5 x 482.6 x 190.5mm |
| Weight: | 2.3kg |
| Safety Agency Listing: | CE |
For more information, please visit the manufacturer's website.