Fenton FPL700 – 700W Two-Channel (2x 350W) Digital Amplifier with Bluetooth
The Fenton FPL700 is a Two-Channel Class D Digital 700W Power Amplifier with a built-in Bluetooth receiver. It offers (6x) RCA (phono) sockets so you can connect up to 3x devices such as a television, CD/DVD player and a laptop using the RCA Input.
Because the FPL700 features Bluetooth it means that you stream your favourite audio from a smart device. For additional versatility, there is also a 3.5mm jack on the front of the unit. This amplifier is a fully integrated media player so you can play MP3’s with ID3-Tag from a USB stick or SD card. It uses the most modern amplification technology that results in a crystal clear and powerful sound. It also ships with a handy IR-remote control that offers full functionality.
The SPL FPL700 is 19″ rack-mountable and features a modern blue LED illuminated front panel. This versatile amplifier allows you to power your Home Theatre Equipment at a maximum output power of 1000W. This makes the FPL700 ideal for home use, parties, bars, cafes, on stage and in the studio.
Front Operation
The front panel of the FPL700 provides essential control and feedback on the performance of the amplifier. Aside from the Power Switch and Power on/off indicator, there are two independent Volume Controls for each of the two output channels. Each of the two channels includes a Peak and Signal indicator so you can monitor the signal performance. The 3.5mm Aux Input offers a convenient MP3 input from a source such as a phone. Above the input is an Input Selector where you can choose a channel that corresponds to the RCA input. (PC – MP3/Aux/BT – TV – CD).
Connectivity
On the rear panel, you will find the Mains Input power & a Fuse Holder. The input section also includes Inputs for Channel A & B with an option for 3x stereo inputs. These channels correspond to the Input Selector on the front of the FPL700. The Speaker Output Terminal board consists of Channel A & B outputs with binding post speaker outputs for both the Left and Right Channels. The minimum load impedance is 4 Ohms.
The SPL 500MP3 has a Signal-to-Noise Ratio of 95dB and an Input Impedance of 10kOhms. It offers a Frequency Response between 20Hz – 20kHz and a Max Output Power of 1400W.
Also available is the Fenton FPL1000 (1000W Two Channel (2x 500W) Digital Amplifier with Bluetooth).