Radial VOCO-LOCO Effects Switcher for Voice or Instrument

The Radial Voco-Loco gives you a foot-controlled microphone preamp and effects loop switcher. So if you’re a vocalist or acoustic instrumentalist, you’re able to incorporate guitar effects pedals into their signal path.

Order in

Add to Quote
Shipping Info
Buy it now, up to 6 months interest free
Available at any of our 6 store locations. Find out how
Order-in Products

Please note: This item is an Order-in item & stock is not kept on hand.

Once your order is placed you will be contacted with an ETA on your item as soon as possible.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match

Radial VOCO-LOCO

The Radial Voco-Loco gives you a foot-controlled microphone preamp and effects loop switcher. So if you’re a vocalist or acoustic instrumentalist, you’re able to incorporate guitar effects pedals into their signal path.

Connect any mic to your guitar pedals

Combining a microphone preamp with a guitar pedal effects loop, the Voco Loco allows vocalists, sax, or trumpet players to add guitar pedals to the signal path. Exactly like you would if you were an electric guitarist adding effects for soling. All you need to do is plug your mic into the Voco Loco via the XLR input, connect your effects pedals using standard 1/4″ guitar cables, then send the output from the Voco Loco to your mixer.

Now, with the touch of a footswitch you’re able to add your favourite delay, reverb, distortion, or wah-wah to any mic’d up an instrument or vocal.

Voco-Loco on voice

Plug your microphone into the Voco-Loco and add exciting effects using guitar pedals for echo, reverb, or distortion. Then, control the effects the way you want.

Voco-Loco with brass

Add echo, chorus, or wah to your sax or trumpet to make your solos stand out from the crowd. So you’re able to deliver a unique performance to the audience they’ll never forget.

Voco-Loco with harmonica

Finally, the Voco-Loco lets you incorporate a chorus, overdrive and reverb to your harp solos. So you can deliver amazing tones without having to bring an amp to the gig.

  • Add guitar effects pedals to vocal or instrument mics
  • Create exciting and unique effects as you perform
  • Turn on multiple effects with one footswitch
  • Works with dynamic and condenser microphones

Audio circuit type: Integrated Op-Amp with Class A FET input circuit

Frequency response: 20Hz ~ 20kHz

Dynamic range: 100dB

Gain: 52dB

Clip Level: +15dBu

Total harmonic distortion: <0.005%

Intermodulation Distortion: <0.005%

Phase Deviation: 8° @50Hz

Input Impedance: 10K-Ohms, 100K (FX Loop)

Output Impedance: 300 Ohms, 3000 Ohms (FX Loop)

Common Mode Rejection Ratio: -73dB @55Hz

Equivalent Input Noise: -120dBu

Noise: -85dBu

Maximum Input: +10dB

Features

Input pad, 180° polarity reverse, Ground lift, Effects Loop

Input Connectors: XLR-F

Output Connectors: XLR-M

General

Construction: 14 gauge steel chassis and outer shell

Power: 100mA, center positive

Conditions: For use in dry locations only between 5°C and 40°C

For more information, please visit the manufacturer's website.