LD Systems RoadBuddy 10 Portable PA with Wireless Mic (B5)

The LD Systems RoadBuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

Discontinued

Discontinued Products

Please note: This product has been discontinued.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

LD Systems RoadBuddy 10

The LD Systems RoadBuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10″ custom woofer and a 1″ compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has a UHF radio receiver which operates with 6584 – 607 MHz range, and can be expanded with an additional system. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. A handheld microphone with 10 mW output power(LDRBUD10B5) or as an alternative a headset microphone with belt pack (LDRBUD10HSB5) and an IR-remote control for the player are included.

For wired devices, the Roadbuddy10 has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy 10 is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

 

  • Battery-powered speaker solution
  • Integrated radio receiver 584 – 607 MHz
  • Bluetooth player with USB port and SD card slot
  • Class D power amplifier with 480 watts of peak power
  • 2 combo sockets for microphone or line inputs
  • 3.5 mm Aux input
  • Master section with 2-band EQ
  • Built-in wheels, pull-out handle and fixing for 35 mm tripod mount
  • Wireless microphone and IR-remote control included

Product type: Battery-powered PA speaker

Low/mid driver dimensions: 10 “

Woofer size: 254 mm

Woofer magnet: Ferrite

Woofer brand: Custom-made

HF driver dimensions: 1 “

HF Driver Size: 25.4 mm

HF driver magnet: Ferrite

HF driver brand: Custom-made

Amplifier Class: D

RMS: 120 W

Peak power: 480 W

Frequency response: 55 – 18000 Hz

SPL (1W/1m): 96 dB

Max. SPL: 115 dB

Protection circuits: over-current , short circuit , thermal overload

Controls:  AUX / MP3 switch , CD / Tape IN Level , Echo , high , low , Mic 1 Level , Mic 2 Level , Total volume

Indicators: Charge/battery status , Power

For more information, please visit the manufacturer's website.