LD Systems Curv500 IAMP 4-Channel Installation Amplifier 4x240W

$1049

SKU: LDCURV500IAMP Category:

LD Systems Curv500 IAMP

The LD Systems Curv500 IAMP is purpose-designed for CURV 500 installations with its low-profile 4-channel Class D rackmount amplifier. High-efficiency switch mode power supply and deliver an impressive 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD. Operating the iAMP® is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low- noise fan. Input is on balanced XLR and terminal block connectors. The iAMP® is capable of driving up to six CURV 500 satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.

Out of stock

Free Shipping
Buy it now, 3 months interest free
Available at any of our 6 store locations. Find out how
In-Store Pickup
Close to any of our stores? Visit one of our 6 showrooms.
Web
Online Out of Stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match

LD Systems Curv500 IAMP

The LD Systems Curv500 IAMP is purpose-designed for CURV 500 installations with its low-profile 4-channel Class D rackmount amplifier. High-efficiency switch mode power supply and deliver an impressive 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD.

Operating the iAMP® is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low- noise fan. Input is on balanced XLR and terminal block connectors. The iAMP® is capable of driving up to six CURV 500 satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.

  • 4 channels with DSP control
  • Purpose-designed for CURV 500 installations
  • Low-profile 1U 19″ rackmount construction
  • Drives up to six CURV 500 satellites or one CURV 500 ISUB subwoofer per channel
  • Single push encoder operation
  • High-contrast OLED display
  • Temperature controlled low-noise fan
  • High-efficiency switch mode power supply

Product number: LDCURV500IAMP

Product type: Power Amplifiers

Type: Installation Power Amplifiers

Rated Output power (1kHz):

  • 2,7 Ohms: 4 x 240W
  • 4 Ohms: 4 x 240W
  • 8 Ohms: 4 x 120W
  • 16 Ohms: 4 x 60

Output circuitry: Class D

Frequency response: 10 – 22000Hz

THD: < 0,01 %

Protection circuits: DC, short circuit, over-current, soft start, thermal overload

Controls: Push encoder

Indicators: OLED Display

Line inputs: 4

Line input connectors: XLR, terminal block

Loudspeaker outputs: 4

Speaker output connections: Speakon compatible, terminal block

Cooling: temperature controlled low-noise fan, noiseless in idle mode

Operating voltage: Switching power supply, 115 V AC / 230 V AC (switchable)

Power consumption @ full load: 1100W

Dimensions: 482 x 44 x 420 mm

Weight: 6.8kg

For more information, please visit the manufacturer's website.