Laserworld Tarm 3 Pure Diode RGB Laser System
The Laserworld Tarm 3 show laser projector is a full-colour white light RGB laser system with full analog colour modulation and diode-only equipment. In fact, the guaranteed output power is specified at 3’000 mW after optics.
DAC/ILDA
The Tarm 3 units have a built-in network DAC for Showcontroller and Showeditor, but also it can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a built-in memory with pre-set patterns, that can be easily triggered through DMX and automatic mode.
The Tarm 3 comes with an integrated ShowNET network interface and free laser show software.
Beam Specs
The Tarm 3 laser has great beam specifications with a diameter of ca. ca. 4.5 mm and a beam divergence of less than <0.6 mrad. It has a bright red (1’000 mW / 637 nm), a green (900 mW / 520 nm), and a blue (1’700 mW / 450 nm) diode laser source.
The scanners are very fast with 45kpps @ 8° ILDA standard and allow for a maximum scan angle of 50°. Thus they are well graphics capable and suitable for professional laser applications. This show laser light has a switchable scan safety.
Excellent Housing
The housing of the Tarm 3 is strong and dust-proof, there is no air circulation inside the enclosure. Specifically, this reduces maintenance efforts to a minimum. Also, the mounting bracket allows for hanging and for upright mounting of the laser system. The tarm 3 is especially suitable for show laser applications in clubs and bars and is useable for beginners as well as professionals.
Tarm 3 Highlights:
- 3’000 mW guaranteed power
- Graphics capable – 45kpps @ 8° ILDA Scanners
- Full-colour mixing – analog modulation