Laserworld CS-8000RGB FX Pure Diode Laser
The Laserworld CS-8000RGB FX is a powerful semi-professional pure diode laser, capable of intense standard laser effects. It can create beams, waves, tunnels and basic graphics. In fact, all of these can be combined with the 2 built-in grating effects and become a real room filler. CS-8000RGB FX is perfect for medium-sized to large nightclub installs, indoor as well as small outdoor events.
Additionally, this laser is easy to plug in and play, it has sound-to-light and stand-alone modes and DMX control. Therefore, using DMX, you can easily integrate it with an existing lighting setup
Powerful Laser Beams
CS-8000RGB FX is a pure diode, analog-modulated, full-colour RGB laser system. It has a total output power of up to 8,000 mW and a guaranteed output power of 7,300 mW. The red laser source has an output power of 1,800 mW / 638 nm. The green has 1’800 mW / 520 nm of power and the royal-blue laser source has an output power of 3’700 mW / 450 nm.
Specifically, the diode laser sources ensure powerful laser beam performance. The CS-8000RGB FX has a beam diameter of 5 mm and a beam divergence of 1.4 mrad. The galvo system has a scan speed of up to 28kpps @ 8° ILDA and a switchable effects grating wheel.
CS-8000RGB FX Grating Effects
The Laserworld CS-8000RGB FX has two grating effects built-in: line grating and burst grating. In addition, it has graphics-capable scanners. Together with the ca. 130 (layers, tunnels, fences, waves, etc.) and the effects gratings stored on the laser, the CS-8000RGB FX offers a variety of combinations for impressive illumination.
The grating effects make patterns appear as if they were displayed by many projectors at the same time. With the grating effects, you will create unique laser projections seen nowhere else. Also, change the pattern size with the two rotary buttons on the rear side of the housing. Also, you can adjust the sensitivity of the microphone via the integrated display.
Projector Modes
Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 130 (layers, tunnels, fences, waves, etc.) effects gratings can be projected in different colours and in various speeds. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.
Next to the modes mentioned above, CS-8000RGB FX provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via a DMX cable to the main projector (master projector) project the same patterns as the master projector.
Custom Shows
The CS-8000RGB FX is computer controllable through a professional ILDA interface. Therefore, you can project pre-programmed laser shows, logos, texts or graphics and animations. Use the laser control software (e.g. Showeditor or Showcontroller) to display your custom visuals.
CS-8000RGB FX Build
The CS-8000RGB FX show laser projector comes with a compact housing, which is lightweight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible – ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.
There are safety features like a key switch, an interlock and an on-off switch. There is no airflow in CS-8000RGB FX’s optical compartment as the temperature is regulated via the separate cooling fins compartment. This reduces maintenance and cleaning requirements to a minimum.
CS-8000RGB FX Key Highlights:
- 8 W pure diode RGB laser system
- Line and Burst grating effects
- Capable of basic graphics