Focusrite REDNET R1 Interface System with a Monitor Controller

The Focusrite RedNet R1 gives you a professional interface system with a monitor controller. It’s the perfect solution for audio professionals looking to adapt their audio configurations quickly. Suiting the ever-increasing demands of the studio environment and interacting with your audio system like never before.

Accepting Orders

$1769
Add to Quote
Shipping Info
Order Online for Delivery
Backorder
Web
Online Backorder
Backorder
VIC
Dandenong Backorder
Backorder
VIC
Richmond Backorder
Backorder
VIC
Ringwood Backorder
Backorder
NSW
Artarmon Backorder
Backorder
NSW
Smithfield Backorder
Backorder
QLD
Mansfield Backorder
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Focusrite REDNET R1

The Focusrite RedNet R1 gives you a professional interface system with a monitor controller. It’s the perfect solution for audio professionals looking to adapt their audio configurations quickly. Suiting the ever-increasing demands of the studio environment and interacting with your audio system like never before.

You can also mix inputs from one of 8 channels (from 32 possible sources) and route up to 12 monitor outputs. Formatted from mono through to 7.1.4 surround; the RedNet R1 provides the flexibility you need for a range of setups. Including Dolby Atmos as well as other immersive audio workflows. You can even complete custom setups of up to 12 outputs for bespoke speaker configurations.

You can also set up the RedNet R1 to control groups of outputs from the multitude of sources and destinations available. From Pro Tools HD, other DAWs, analog inputs and outputs, ADAT and S/PDIF connections, and entire Dante audio ecosystems. The RedNet R1 allows you to switch and sum audio across platforms, simultaneously and interchangeably. While top-panel control includes level, reference level preset selection, dim, mute, and a variety of solo modes. There’es even an A/B switch for switching between monitoring presets. As well as up to four fold-down presets for fast switching and checking downmixes.

What’s more, the RedNet R1 also features Dante-enabled talkback; internal mic preamp; built-in microphone; as well as a high-powered headphones output. So you can monitor audio inputs and outputs as well as interact with talent and other users on the system.

  • The first Dante®, Pro Toolsâ„¢ | HD and Thunderboltâ„¢ interface system with a monitor controller
  • Supports a maximum of eight source groups, each of up to 12 channels per source, to a maximum of 32 total channels.
  • Supports up to 12 monitor output channels formatted from mono through to 7.1.4 surround
  • Flexible monitor controls include level, preset level selection and lock, plus dim, mute and a variety of solo modes
  • A/B switch for switching between monitoring setups
  • Up to four fold-down presets allow fast switching for checking downmixes
  • Talkback functionality provides four destination groups when used with a Red interface, or a single talkback group when used with other Dante devices
  • Built-in internal microphone, or users can connect their own via the rear-panel XLR
  • Two LCDs display highly accurate level metering of the outputs, sources and headphone outputs, and give visual cues for navigating menus
  • High-fidelity headphone output can take its source from a multitude of analogue or digital locations
  • RedNet Control software with hardware focused workflow is designed for quickly setting up simple or complex configurations
  • Quarter-inch jack footswitch input socket for talkback management, LFE muting and more
  • Powered via Ethernet (using the PoE standard), or using the supplied DC power supply

INTERNAL TALKBACK

Note: All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω

Gain Range: 0dB to 55dB

Type: Electronically Balanced, Zin = 3kΩ

Max. Input Level: +10dBu ± 0.5dB

EXTERNAL TALKBACK

Note: All measurements taken at maximum gain unless otherwise stated, Rs = 150Ω

Gain Range: 0dB to 55dB

Max. Input Level: +10dBu ± 0.5dB

Frequency Response: 20Hz – 20kHz ± 2dB

THD + N: Less than -98dB (0.0012%) @ -1dBFS

EIN: Less than -128dBu ‘A’-Weighted (typical)

Signal-To-Noise Ratio: -111dB ‘A’-Weighted (typical), min gain

Common-Mode Rejection Ratio: 50/60Hz CMRR: <-77dB

Type: Electronically Balanced, Zin = 3kΩ

HEADPHONE OUTPUT

Note: All measurements taken at +19dBm reference level, maximum gain, RL = 600Ω

0 DBFS Reference Levels: +11dBm

Frequency Response: 20Hz to 20kHz ±0.5dB

THD + N: -100dB (0.001%) @ -1dBFS, Rs = 150R

Dynamic Range: 108dB ‘A’-weighted (typical), 20Hz – 20kHz

Noise In Presence Of Signal (NiPoS): Greater than -97 dBu ‘A-Weighted’

Output Impedance: 5Ω

Headphone Impedance: 32Ω – 600Ω

MICROPHONE/ LINE CROSSTALK

Mic Input To Headphone Output: Less than -122dB; 20Hz – 20kHz (all other channels at 0dBFS)

Headphone Output To Mic Input: Less than -84dB; 20Hz – 20kHz (all other channels at 0dBFS)

HEADPHONE CROSSTALK

Left To Right: Less than -85dB; 20Hz – 20kHz (all other channels at 0dBFS)

Right To Left: Less than -85dB; 20Hz – 20kHz (all other channels at 0dBFS)

DIGITAL PERFORMANCE

Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources: Internal or from Dante Network Master

REAR PANEL CONNECTIVITY, POTS & SWITCHES

External Talkback Mic Input: 1 x XLR (F)

Foot Switch: 1 x 1/4″ stereo jack

OUTPUTS

Headphone Outputs: 1 x 1/4″ stereo jack

POTS & SWITCHES

Power Switch: 1 x Switch

Talkback Gain Pot: 1 x Pot

Talkback Switch: 1 x Tri-State Switch (External Talkback + 48V, External Talkback and Internal Talkback)

PSU & NETWORK CONNECTIONS

PSU (PoE And DC): 1 x PoE Input and 1 x DC 12V Locking Barrel Input Connector

Network: 1 x Standard RJ45 connector

POWER

Power Over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard (PoE A or PoE B compatible)

DC Power Supply: 1 x 12V 1.2A DC Power Supply

Power Consumption: PoE: 10.3W – DC: 9W (When using supplied DC PSU)

For more information, please visit the manufacturer's website.