Focusrite REDNET AM2
The Focusrite RedNet AM2 gives you a compact, Power-over-Ethernet (PoE) supplied stereo analog device for any Dante audio-over-IP network. Sporting a powerful headphone amp that can drive both your high and low impedance headphones; the RedNet AM2 is the ideal monitoring device to add extra functionality to your audio network.
You’ll find a pair of rear-panel XLR outputs that offer line-level signals of up to 24dBu with both top panel level control and mute switch. While the front-panel 1/4″ output is capable of driving high signal levels perfect for monitoring in high-SPL environments. On the bottom of the sturdy aluminum and steel chassis, you’ll find a threaded mic stand boss that allows you to place the RedNet AM2 in any location. Whether you need it on your desk or at a performer’s fingertips on a stand.
Finally, the IEEE standard PoE input allows a single ethernet cable connection. So you can provide power, remote control, clocking, and audio data to the RedNet AM2.
0 DBFS Reference Output Levels: 18 or 24dBu (switchable)
Frequency Response Output: 20Hz – 20kHz ±0.05dB
THD N Output: <-100dB (0.001) unweighted, 20Hz – 20kHz; -1dBFS input
Dynamic Range: 120dB A-weighted (typical), 20Hz – 20kHz
CROSSTALK
Output To Output: <-100dB unweighted, 20Hz – 20kHz; -20dBFS input
HEADPHONE OUTPUT
0 DBFS Reference Levels Headphones: 19dBm
Headphone Frequency Response: 20Hz – 20kHz ±0.05dB
Headphone THD N: <-100dB (0.001) unweighted, 20Hz – 20kHz; -1dBFS input
Headphone Dynamic Range: 118dB A-weighted (typical), 20Hz – 20kHz
Headphone Impedance: 32O – 600O
DIGITAL PERFORMANCE
Supported Sample Rates: 44.1 / 48 / 88.2 / 96 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
Clock Sources: Internal or from Dante Network Master
FRONT PANEL CONNECTIVITY
Headphone Outputs: 1 x 1/4″ stereo jack
Line Outputs: 2 x Male XLR
PSU (PoE And DC): 1 x PoE (Port 1) Input and 1 x DC 12V Barrel Input Connector
Network: Green LED: Indicates device is network master or network slave, shows valid network lock
TOP PANEL INDICATORS
Power: LED illuminates Green when PoE is connected and Red when DC power is connected
Signal: Signal indicator LED for both network input channels
Control Functions: 2 x Pots
DIMENSIONS
Height (Chassis Only): 48mm/ 1.89″
Height (Inc. Pots And Feet): 58mm/ 2.28″
Depth (Chassis Only): 106.5mm/ 4.19″
Depth (Inc. Connectors): 116mm/ 4.57″
POWER
Power Over Ethernet (PoE): Complies with IEEE 802.3af class 0 Power-over-Ethernet standard
DC Power Supply: 1 x 12V 1.2A DC Power Supply
Power Consumption: PoE: 11.0W – DC: 9.8W
Operating Temperature: Operates at up to an ambient temperature of 50 degrees Celcius
For more information, please visit the
manufacturer's website.