Focusrite ISAADN2 2 Channel A-D Card for ISA One

The Focusrite ISA ADN2 gives you an optional two-channel A/D card for the ISA One mic preamp and DI. Offering Dante, AES3, ADAT and S/PDIF; the ISA ADN2 operates at sample rates of up to 24-bit/192kHz.

Order-In

Add to Quote
Shipping Info
Order-In Products

Please note: Some item(s) in your order are Order-In item(s) and stock is not kept on hand.

Once your order is placed you will be contacted with an ETA on your item as soon as possible.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Focusrite ISA ADN2

The Focusrite ISA ADN2 gives you an optional two-channel A/D card for the ISA One mic preamp and DI. Offering Dante, AES3, ADAT and S/PDIF; the ISA ADN2 operates at sample rates of up to 24-bit/192kHz.

The ISA ADN2 offers primary and secondary RJ45 Dante Output ports; XLR connector for AES3 output; TOSLINK connector for ADAT output and RCA connector for S/PDIF outputs. While Word Clock I/O on BNC connectors allow synchronisation of multiple digital sources. This also includes syncing the Dante network to house clock, or external equipment to the Dante network.

Dante outputs on the card also provide the ISA One with network connectivity to all Focusrite RedNet devices and Red interfaces. As well as any other Dante enabled device from hundreds of manufacturers. You can access metering and settings through RedNet Control. While routing is configured using Dante Controller.

  • Two-channel analogue-to-digital converter for ISA One
  • Up to 24-bit/192kHz sample rate
  • Dante connectivity via Primary and Secondary Ethernet ports with redundancy and auto switchover in case of failure
  • Two-channel XLR connection for AES3 output
  • Two-channel RCA connection for S/PDIF output
  • Two-channel TOSLINK connector for ADAT output
  • Word Clock I/O on BNC connectors allows for synchronisation to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
  • RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
  • Brainworx bx_console Focusrite – exclusive plug-in that faithfully captures the sound, feel and styling of the original Focusrite ISA 110 Equaliser and ISA 130 Dynamics Modules.

AUDIO PERFORMANCE


0 DBFS Reference Levels: 22dBu

Frequency Response: 20Hz – 20kHz ±0.1dB

THD+N: -105dB (0.0006%) unweighted, 20Hz – 20kHz; -1dBFS input

Noise In Presence Of Signal: -121dBu ‘A’-Weighted (typical)

Dynamic Range: 121dB ‘A’-weighted (typical), 20Hz – 20kHz

DIGITAL PERFORMANCE


Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources: Internal or Word Clock

CROSSTALK


Input To Input: < -100dB; 20Hz – 20kHz (driven channel at -20dBFS)

FRONT PANEL OUTPUT CONNECTIVITY


Channel Count: 2 x Dante channels

Output: 1 x Male XLR

DANTE


Output: 2 x Ethernet standard RJ45 connectors (Compatible with Cat 5e and above).

Channel Count: 2 x Dante channels

AES3


Channel Count: 2 x Dante channels

Output: 1 x Male XLR

ADAT


Channel Count: 2 x ADAT channels

Output: 1 x TOSLINK connectors

Channel Assignments @ 44.1 KHz, 48 KHz: Port 1 = Channels 1 – 2

Channel Assignments @ 88.2 KHz, 96 KHz: SMUXI: Port 1 = Channels 1 – 2

Channel Assignments @ 176.4 KHz, 192 KHz: SMUXII: Port 1 = Channels 1 – 2

S/PDIF


Channel Count: 2 x S/PDIF channels

Output: 1 x RCA phono socket

WORLD CLOCK

Word Clock Input: 1 x BNC 75Ω port (Switchable Termination)

Word Clock Output: 1 x BNC 75Ω port

For more information, please visit the manufacturer's website.