Earthworks DM20 Gen 2 Tom and Snare Drum Microphone

The Earthworks DM20 Gen 2 Microphone is a precision-engineered cardioid condenser microphone designed for close miking tom and snare in live performance and studio recording environments.

In stock

$699
Add to Quote
Shipping Info
Order Online for Delivery
or visit any of our 7 showrooms to purchase your items.
(Stock availabilities below)
2 in stock
Web
Online 2 in stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

Earthworks DM20 Gen 2 Tom and Snare Drum Microphone

The Earthworks DM20 Gen 2 Microphone is a precision-engineered cardioid condenser microphone. It is designed for close miking tom and snare in live performance and studio recording environments.

Precision Pattern Control

Unwanted leakage comes from all directions. DM20’s uniform cardioid pattern is engineered to provide more than 25 dB of rejection. It does so at 140 degrees and an average of over 16 dB across the back 180. A third-octave polar chart reveals just how consistent the performance is across all frequencies — brilliant, detailed pickup across the front and dramatic, even attenuation across the back.

Next-Generation Electronics

2nd-Gen Earthworks microphones draw only 6 mA of phantom power current, while increasing performance with all types of devices, including transformer-based preamps and splits.

Hot-plugging (connecting microphones with phantom power already on) can result in spikes with enough power to damage microphones, preamps and other equipment.

While we always recommend enabling phantom power after connecting microphones, we realize that it can be difficult or even impossible to consistently avoid hot-plugging in modern recording, streaming and live performance workflows, where timelines are tight and phantom power is often enabled when the session file is loaded, well before the microphones are plugged in.

2nd-Gen Earthworks microphones have power handling to exceed anything normally experienced with even the largest touring consoles and stageboxes.

RM2 Drum Rim Mount

RM2 is a low-profile, tour-quality solution for securely mounting DM20 Gen 2 to the rim of snare drums and toms. It eliminates the need for mic stands. RM2 is specifically for DM20 Gen 2. It provides an optimal starting point for fine position adjustment using the microphone’s gooseneck and height in the mic clip.

Industry-leading compatibility with a wide variety of metal drum hoop types and suspension mounts.

The Speed of Sound

Lastly, the impulse response is fast and clean. Furthermore, the frequency response is flat and extended. DM20 Gen 2 doesn’t sound like a microphone — it sounds like your drum, only bigger.

DM20 Gen 2 Includes:

  • 1 DM20 Gen 2 Microphone
  • 1 RM2 Rim Mount
  • 1 Microphone Bag
  • 1 Microphone Clip
  • 1 Foam Windscreen
  • Cardioid Condenser Microphone
  • For Snares and Toms
  • For Live Sound or Recording
  • 20 Hz to 20 kHz Frequency Response
  • Even Response Across Cardioid Pattern
  • Handles 157 dB SPL
  • Captures Accurate Transient Response
  • Stiff, Flexible Gooseneck
  • Stainless Steel Construction
  • Included RM2 Rim Mount and Windscreen

Frequency Response: 20Hz – 20KHz
Polar Pattern: Cardioid
Sensitivity: -51 dBV/Pa (2.8 mV/Pa)
Peak Acoustic Input: 157 dB SPL
Minimum Load Impedance: 1kΩ
Noise: 20 dB SPL (A-Weighted)
Power Requirements: 48V, 6mA
Dimensions (L x D): 8 in x 0.860 in / 203.2 mm x 21.84 mm
Color: Stainless Steel
Weight: 0.40 lbs / 0.18 kg
Manufacturer Part Number: DM20 G2
Gooseneck Length & Diameter: 3.5 in x 0.375 in / 88.9 mm x 9.53 mm
Included Accessories: RM2 Rim Mount, Microphone Bag, Foam Windscreen

For more information, please visit the manufacturer's website.