Axiom SW212A Dual 12″ Bi-Amped Subwoofer
Axiom SW212A is a very compact Band-Pass/Bass-Reflex subwoofer providing high output and extended low-frequency response. It is equipped with two 12” neodymium transducers with a 3.5” aluminium voice coil. Also, it has a large displacement suspension system, and water-repellent cone. Specifically, it is able to provide clean and undistorted LF reproduction at very high SPL.
Advanced Audio
The system processing is based on the CORE2 DSP platform designed by the PROEL R&D Laboratories using one of the most advanced SHARC DSPs for audio applications. It features 40-bit floating point resolution and top-quality 24bit AD/DA converters. Therefore, it has perfect signal integrity, dynamic range in excess of 110dB, and superior sonic performance.
Thanks to its massive processing power, the CORE2 platform is capable of providing the most sophisticated algorithms for speaker processing, together with remote control and networking capability.
Pronet Ax Software
The PRONET AX control software, working on a solid and reliable CANBUS-based network protocol, provides an intuitive interface for the remote control of the whole system. Additionally, initiate EQing, delaying, managing the protection functions, and monitoring the status of the amplifier.
SW212A’s Amplifier
The SW212A is powered by a new generation of CLASS D power amplifiers with digitally-controlled SMPS. The innovative technology used for these amplifiers offers performance at the top of the range. Specifically, it brings superior sound definition at any audio frequency. Also, very high dynamics for low level signals, and very low distortion even at maximum power. The amplifier’s superior sound quality can be compared with top-of-the-range AB-class analog systems.
PFC (Power Factor Correction)
The amplifier module employed in the SW212A features also PFC (Power Factor Correction). Specifically, it guarantees the highest level of power regardless of any eventual fluctuations of the power supply. Also it can reduce power consumption (less than 0.9W in standby) while enhancing reliability and consistency in all operating conditions.
It delivers in an ultra-compact package 1400W from each of its two channels: one channel is used to drive the two 12” woofers, the other, through an output SPEAKON connector, can power AX16/8CL line array modules or other AXIOM speakers.
System Ready
Axiom SW212A has been mainly designed to provide the optimal low frequency extension to the AX16/8CL line array modules. Also, the built-in power module can provide 1400W to power up to four AX16CL line array modules. The built-in CORE DSP provides 4 presets for different combinations.
Rigging
In fact, the SW212A features an on the top panel a special metal plate and it comes with a dedicated bracket for fast coupling with the AX16/8CL’s rigging hardware. Using this simple system, up to two AX16CL or four AX8CL modules can be easily installed on an SW212A.
The standard system, composed of four AX16CL line array modules and two SW212A subwoofers, features 5600W of total power and a line-array dispersion pattern, making it the perfect solution for high-performance portable sound reinforcement applications.
SW212A Key Highlights:
- Band-Pass/Bass-Reflex Active Subwoofer
- Two 12” Neodymium woofers with 3.5” voice coil
- Water repellent cone