Behringer SYSTEM 35 Complete Modular Synthesizer with 25 Modules
The Behringer SYSTEM 35 brings you a pre-assembled modular synthesizer with 25x vintage-sounding modules from the ’70s. The SYSTEM 35 is an amazing musical tool for anyone interested in psychedelic or neon-bathed road of modular synthesis. This neat package will give you all the amazing modular synths so you can create amazing music right out of the box. Furthermore, you don’t even have to worry about power as the included EURORACK GO case comes with its own PSU (Power Supply Unit).
Intricate Patches and Hours of Experimentation
The setup offers 2x 921A OSCILLATOR DRIVERS, 4x 921B VCOs and 1x 921 VCO. All of which provide 5x fully-featured voices that you can adjust and tweak any way you want. With 2x included CP3A-M MIXER modules; you can mix up to 4x inputs which you can then patch out to other modules. Adding a pad to your song is also possible as one signal can go to a delay module and another can go into a step sequencer or other modules in SYSTEM 35. This provides you with more intricate patches and hours of experimentation.
Also included is the CP35 ATTENUATOR module with 4x linked attenuators and 2x sets of 4x multiples and reference voltages. You can connect a single signal to the CP35’s first input which will allow it to pass to all 4x outputs. This means you have up to 4x variable outputs of a single signal source. Also included are 2x banks of 4-point multiple circuits for you to be able to route multiple copies of input signals to other modules.
The SYSTEM 35 also offers the 961 INTERFACE module which converts V-trig to S-trig and vice versa. It can even convert any audio source you plug into a V-trig to drive other modules in your setup. For added flavour, you can further shape and control a signal’s timbre and resonance with the 914 FIXED FILTER BANK. This features 12x active bandpass filters ranging from 125 Hz to 5.6 kHz with both Low Pass and High Pass filters. The 923 module features separate Low and High Pass filters each with its own dedicated frequency cutoff controls and has jacks for both pink and white noise.
Mix and Switch Control Voltages
The SYSTEM 35 also comes with a 992 CONTROL VOLTAGES module that allows you to mix and switch control voltages, 904B VOLTAGE CONTROLLED HIGH PASS FILTER and 904A VOLTAGE CONTROLLED LOW PASS FILTER, three 902 VOLTAGE CONTROLLED AMPLIFIERS, three 911 ENVELOPE GENERATORS and a CM1A MIDI-to-CV converter so you can control the SYSTEM 35 with a MIDI keyboard, sequencer or DAW, to truly round out this rig. We’ve even included a few blank panels in case you want to expand the SYSTEM 35 with even more modules.
Whether you’re just getting into modular synths or looking to complete your collection, the SYSTEM 35 modular synthesizer from Behringer is a great tool to have when creating amazing music.
Modules included with the SYSTEM 35
- (2x) 921A Oscillator Driver
- (4x) 921B Voltage Controlled Oscillators (VCO)
- 921 Voltage Controlled Oscillator (VCO/LFO)
- 914 Fixed Filter Bank (FFB)
- 923 Filters and Noise Sources
- 904B High Pass Filter (HPF)
- 904A Low Pass Filter (LPF)
- 992 Control Voltages
- CM1A – MIDI interface
- (2x) CP3A – O
- (2x) CP3A – M
- CP35 Attenuator / Voltage Source / Multiple
- 961 Interface.
- (3x) 911 Envelope Generators (EG)
- (3x) 902 Voltage Controlled Amplifiers (VCA)
The SYSTEM 35 is also available as a SYSTEM 15 (with 16 Modules) and SYSTEM 55 (with 38 Modules).