ART Pro Audio XDirect Active DI Box

$69

SKU: ART-XDIRECT Category:

The ART Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

Out of stock

Free Shipping
Buy it now, 3 months interest free
Available at any of our 6 store locations. Find out how
In-Store Pickup
Close to any of our stores? Visit one of our 6 showrooms.
Web
Online Out of Stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match

The ART Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4″ and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The Input Attenuator switches allow for a wide range of signal levels and the Input Link jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

  • A stylish and very compact durable aluminum chassis
  • Input attenuator switches for a wide range of signal levels
  • Phase Invert switch on the box for quick phase corrections
  • An “input thru” jack that allows for tapping off of the signal chain
  • A ground-lift switch that lets you totally separate the input and output signal grounds, to reduce hum and ground-loop noise

Frequency Response 10Hz -100kHz, +/-.5dB @ +0dBu

THD <.05% Typical

Dynamic Range >100dB typical

Maximum Input Level 4/+24/+44dBu

Maximum Output Level +6dBu (battery powered), +14dBu (phantom powered)

Input Connections ¼-inch TRS and XLR female unbalanced, 470k Ohm

Output Connections XLR male balanced, <600 Ohm

Output Phase Switchable, Normal/Invert

Ground Lift Switchable, fully isolates inputs from chassis and output

Input Attenuation Switchable, (0dB, -20dB, -40dB)

Filter Type / Response Switchable, Low Pass, -3dB @30kHz

Power Requirements 9volt @3.5ma (internal battery) or 18VDC-48VDC @9.5ma (phantom power)

Dimensions 44.5 x 107 x 89 mm

Weight 0.34 kg

For more information, please visit the manufacturer's website.