ART Dual Z Direct Dual Channel Passive DI Box

$89
SKU: ART-DUALZDIRECT Categories: , ,

ART Dual Z Direct

The ART Dual Z Direct is a premium 2 channel DI that provides high quality totally passive interfaces for your instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance single-ended 1/4" inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect's audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUAL Z Direct a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allows for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise. What further sets the ART DUAL Z Direct apart from other "DI" boxes are its extended features and versatility. We have added switchable low pass FILTERs that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are also very effective in reducing any digital computer noise artifacts when using the DUAL Z Direct as an interface between a computer-based audio workstation and your monitors. The PHASE INVERT switches, while not normally included with your "run of the mill" DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix. The compact black-anodized all aluminum case and it's passive design allow the DUAL Z Direct to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It's full feature set, rugged construction, and high-end specifications make the DUAL Z Direct the obvious choice.

Out of stock

Order Online for Delivery
or visit any of our 6 showrooms to purchase your items.
(Stock availabilities below)
Out of stock
Web
Online Out of stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

ART Dual Z Direct

The ART Dual Z Direct is a premium 2 channel DI that provides high quality totally passive interfaces for your instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUAL Z Direct a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.

The input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allows for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

What further sets the ART DUAL Z Direct apart from other “DI” boxes are its extended features and versatility. We have added switchable low pass FILTERs that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are also very effective in reducing any digital computer noise artifacts when using the DUAL Z Direct as an interface between a computer-based audio workstation and your monitors. The PHASE INVERT switches, while not normally included with your “run of the mill” DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.

The compact black-anodized all aluminum case and it’s passive design allow the DUAL Z Direct to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DUAL Z Direct the obvious choice.

  • 2-channel passive direct box
  • A stylish and very compact durable aluminum chassis
  • Input Attenuator switches for a wide range of signal levels
  • Phase Invert switch on the box for quick phase corrections
  • An “input thru” jack that allows for tapping off of the signal chain
  • A ground lift switch which lets you totally separate the input and output signal grounds, to reduce hum and ground-loop noise

Type: DI

Channels: 2

Pads: -20dB, -40dB

Polarity Switch: Yes

Ground Lift: Yes

Inputs: 2 x TRS

Outputs: 2 x XLR, 2 x TRS thru

Dimensions: 47 x 117 x 99mm

Weight: 0.40 kg

For more information, please visit the manufacturer's website.