Ortofon Scratch OM Pre-Mounted with Headshell

$199

SKU: SCRATCH-OM-HS Categories: , ,

Ortofon Scratch OM Pre-Mounted

The Ortofon SCRATCH OM pre-mounted is a practical and convenient solution for our customers who want a fast and easy and replacement. Pre-mounted onto an Ortofon HS headshell the cartridge will plug directly into your SME tonearm. The Scratch OM cartridge is renown for its high output, tracking ability, and low vinyl wear. Perfect for DJs wanting scratch and back cue during their performances.  

In stock

Free Shipping
Buy it now, 3 months interest free
Available at any of our 6 store locations. Find out how
In-Store Pickup
Close to any of our stores? Visit one of our 6 showrooms.
Web
Online 2 in stock
Updating stores stocks...
Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match

Ortofon Scratch OM Pre-Mounted

The Ortofon SCRATCH OM pre-mounted is a practical and convenient solution for our customers who want a fast and easy and replacement. Pre-mounted onto an Ortofon HS headshell the cartridge will plug directly into your SME tonearm. The Scratch OM cartridge is renown for its high output, tracking ability, and low vinyl wear. Perfect for DJs wanting scratch and back cue during their performances.

 

  •  Universal mount fitting a wide range of S-shaped tonearms
  • Correct Baerwald alignment with the major part of tonearms with universal mount
  • Spherical stylus minimizes scratching
  • Increased tracking ability
  • Reinforced rubber suspension
  • Output voltage at 1000Hz, 5cm/sec. – 7 mV
  • Channel balance at 1kHz – 1,5 dB
  • Channel separation at 1kHz – 25 dB
  • Channel separation at 15 kHz – 15 dB
  • Frequency range at -3dB – 20-20.000 Hz
  • Frequency response – 20-15.000 Hz 3dB/-2dB
  • Tracking ability at 315 Hz at recommmended tracking force – 80 μm
  • Compliance, dynamic lateral – 6 μm/m N
  • Stylus type – Spherical
  • Stylus tip radius – R 18 μm
  • Tracking force range – 3,0-5,0 g (30-50 mN)
  • Tracking force recommended – 4,0 g (40 mN)
  • Tracking angle – 20°
  • Internal impedance, DC resistance – 750 Ohm
  • Internal inductance – 450 mH
  • Recommended load resistance – 47 kOhm
  • Recommended load capacitance – 200-600 pF
  • OM cartridge weight – 5 g
  • OM pre-mounted on SH-4 weight incl. screws – 14,5 g
For more information, please visit the manufacturer's website.