ICON AirMon Pro Wireless Monitoring System
The Icon AirMon Pro is a wireless monitoring system consisting of two modules; a transmitter and a receiver. The system is expandable with limitless receivers per transmitter and up to three transmitters per immediate area, depending on Wi-Fi strength.
Super low latency was at the top of the agenda in the design, as was the highest possible audio quality. The signal is transmitted digitally via 2.4 GHz. The available sample rates are 32K, 48K (16 bit mono) or 96K, the latter offering extremely high audio quality, 24 bit stereo signal. In fact, this represents unsurpassed audio quality for products of the AirMon Pro’s type and class.
Lastly, Icon AirMon Pro is ideal for podcasters and performers who demand professional, exemplary standards in audio quality. Furthermore, this uniquely advanced system offers robust, intelligent build quality, coupled with a stylish, sleek design.
Features:
- Sleek, super compact and stylish design
- Uncompressed digital transmission up to 24-bit/96KHz sampling rate
- Simple one-button pairing technology
- Type C USB connector for charging
- Rechargeable battery for both transmitter and receiver
Audio – Transmitter
Sampling bit rate: 96KHz 24bit, 48KHz 16bit, 32KHz 16bit
Channel Mode: 96KHz STEREO, 48KHz MONO, 32KHz MONO
Input Level: -3dBV
Input Impedance: 10K ohm
Audio – Receiver
Sampling bit rate: 96KHz 24bit, 48KHz 16bit, 32KHz 16bit
Channel Mode: 96KHz STEREO, 48KHz MONO, 32KHz MONO
Output Level: 16mW
Output Impedance: 32 ohm
Radio Frequency – Transmitter
Operating Frequency: 2400MHz-2483MHz
Digital Modulation: GFSK
Occupied Bandwidth: 4MHz +4MHz
Transmission output: 10mW
Selectable Channel: 16 channel
Radio Frequency – Receiver
Operating Frequency: 2400MHz-2483MHz
Digital Modulation: GFSK
Occupied Bandwidth: 4MHz +4MHz
Receiving Sensitivity: -85dBm
Selectable Channel: 16 channel
Power – Transmitter
Current consumption: 140mA
Power Requirements: Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
Battery Operating Time: 6 hours for 1000 mA use
Power – Receiver
Current consumption: 90mA
Power Requirements: Built-in rechargeable LiPo battery charged via USB 5V, 0.5A
Battery Operating Time: 11 hours for 1000 mA use
Dimensions and Weights – Transmitter
Dimensions (WxDxH): 53mm x 71mm x 21mm (2.1″x2.8″x0.8″)
Weight: 78.6g
Accessory: USB Recharging cable and storage pouch
Dimensions and Weights – Receiver
Dimensions (WxDxH): 44mm x 61mm x 21mm (1.7″x2.4″x0.8″)
Weight: 41g
Accessory: USB Recharging cable and storage pouch
For more information, please visit the
manufacturer's website.