SKU: NX4-6000 Category:

$710.00

  • Online Stock In Stock
  • Updating stores stocks...
Price Match

Overview

Behringer NX4-6000 Power Amp with Smart Sense

Behringer NX4-6000 Power Amp with Smart Sense offers a lightweight, rack-mountable and sturdy, stereo power amplifier capable of delivering 440W of peak power per channel at 8 Ohms, or in bridge mode, up to 1600W of peak power into two 8-Ohm speakers.  The Behringer NX4-6000 Power Amp packs an impressive amount of power into a lightweight, cool-running unit, that ensures you’ll have plenty of headroom to work with.  Employing SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply will enable you to benefit Benefit from a linear frequency response at any speaker load. Provide a linear 20 Hz to 20 kHz frequency response with noise-free audio and fast transient response at maximum output power, into any speaker load impedance. Zero-attack limiters supply maximum output with reliable overload protection. Experience low noise, superior transient response, and low power consumption, thanks to an efficient switch-mode power supply.

The NX4-6000 features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A variable-speed fan and ventilation openings with back-to-front air flow further prevent overheating.

Operating the NX4-6000 is dead simple. Benefit from at-a-glance confirmation of your system’s vital signs, by way of the NX4-6000’s simple front-panel controls and indicators. Positive-detent gain controls with signal level LEDs on each channel make gain staging a piece of cake. Rear-panel XLR combo input connectors ensure compatibility with just about any source. Reliable twist-lock speaker connectors prevent unwanted “unplugging” incidents. You also get switchable dual mono, stereo, and mono bridge modes, along with an easy-to-use stereo crossover.

There is no need for  massive heat sinks or toroid transformers any more, this D Class Power Amp from Behringer has an impressive amount of punch and clarity.

 

 

 

  • Delivers a maximum of 4 x 1600W at 2 Ohms, 4 x 860W at 4 Ohms, or 4 x 440W at 8 Ohms in stereo mode
  • Delivers a maximum of 2 x 3000W at 4 Ohms or 1600W at 8 Ohms in bridge mode
  • Weighs only 6 kgs
  • Cool-running, high-density Class-D technology with near-zero thermal buildup
  • Efficient switch-mode power supply for noise-free audio, fast transient response, and low power consumption
  • SmartSense loudspeaker impedance compensation features fully linear frequency response at any speaker load impedance
  • Zero-attack limiters offer maximum output level with reliable overload protection
  • Built-in stereo crossover with low-cut, high-cut, and full-range mode
  • Detented and illuminated gain controls for precise level setting
  • Precise 4-segment Signal and Limit LEDs to monitor performance
  • XLR and 1/4″ TRS combination input connectors for compatibility with balanced and unbalanced audio sources
  • Twist-lock speaker connectors for reliable connection
  • Independent DC, LF, and thermal overload protection on each channel automatically protects amplifier and speakers without interruption
  • Back-to-front ventilation system prevents thermal buildup for reliable operation

Spec

Maximum Output Power:

  • 4 x 1600 W into 2 Ohms per channel, stereo
  • 4 x 860 W into 4 Ohms per channel, stereo
  • 4 x 440 W into 8 Ohms per channel, stereo
  • 2 x 3000 W into 4 Ohms, bridged
  • 2 x 1600 W into 8 Ohms, bridged

Amplifier: Class Class-D

Input Sensitivity: 0.775 V (0 dBu), for rated power into 4 Ohms

Distortion: <0.2%

Frequency Response: 20 Hz to 20 kHz, +0 / -2 dB

Damping Factor: >145 at 8 Ohms

Signal to Noise: >100 dB

Input Connections: 4 x XLR-1/4″ combo jacks

Input Impedance:

  • 10 kOhms, unbalanced
  • 20 kOhms, balanced

Output Connectors: 4 x locking-style speaker connectors

Controls:

  • Front Panel:
    • Channel A, B, C, and D
    • gain knobs
    • Power switch
  • Rear Panel:
    • 2 x mode switches (bridge, stereo, mono)
    • 2 x crossover switches (LF, full range, HF)
    • Circuit breaker

Indicators Power: Amber LED

Limit: 0 dB LED (per channel)

Signal: -40, -6, -3 dB LEDs (per channel)

Protect: Red LED (per channel)

Cooling: Continuously variable speed fan  with Back-to-front air flow

Amplifier Protection:

  • Thermal and DC protection
  • Stable into reactive or mismatched loads

Overload Protection:

  • On/off muting
  • DC-fault power supply shutdown

Power Supply: 120 VAC, 60 Hz

Fuse: T 25 A H, 250 V

Power Consumption: 620 W, at 2 Ohms, 1/8 rated power

Power Connector: Standard IEC receptacle

Dimensions (W x H x D): 48.3 x 9.4 x 31.6 cm (including  5 mm rubber feet)
Weight: 6.1 kg

Manufacturer

For more information, please visit the manufacturer's website.

Reviews