ADAM Audio Sub15 Active Studio Subwoofer
The ADAM Audio Sub15 is an active studio subwoofer that extends the bass response of main and midfield monitors down to 20 Hz, designed for producers and audio engineers working in medium to large control rooms. Its rigid aluminium woofer and 1000 W RMS PWM amplifier provide substantial low-frequency power, while adjustable crossover, level and phase controls help you integrate it with your monitoring system.
Extend Your Monitoring Down to 20 Hz
Deep synth bass, the lowest notes of a bass instrument and the weight beneath a kick drum can all influence your mix decisions. With a frequency response extending from 20 Hz to 150 Hz, the Sub15 brings those lower octaves into your monitoring range so you can assess their level and relationship to the rest of your production.
The aluminium cone, dual magnets and substantial 100 mm voice coil work with the dedicated 1000 W RMS amplifier to handle demanding bass passages and sudden low-frequency peaks. A generously sized, downward-firing bass port with rounded edges is designed to reduce airflow noise as the subwoofer moves air.
Match the Bass to Your Main Monitors
The Sub15 gives you control over how its output meets your studio monitors. Adjust its upper frequency limit between 50 Hz and 150 Hz, then use the sub level control to balance the bass against your main speakers. This lets you tailor the crossover and level to your monitors and listening setup.
Switchable satellite outputs let your main speakers run full range or through an 85 Hz high-pass filter. Engaging the filter reduces the deep bass sent to those speakers, allowing the Sub15 to take on that part of the frequency range. The 0°/180° phase switch helps you address cancellation around the crossover region, giving you another useful adjustment when positioning and aligning the system.
Build It Into Your Studio Signal Chain
Balanced XLR and unbalanced RCA inputs and satellite outputs make the Sub15 adaptable to different studio connections. Feed the left and right line-level outputs from your audio interface, mixer or monitor controller into the subwoofer, then route its satellite outputs to your powered monitors or the amplifier driving your passive monitors.
Use suitable XLR audio cables when connecting equipment with balanced XLR connections. If your monitoring system calls for additional bass coverage, the dedicated balanced Sub Out allows you to daisy-chain further Sub15 units.
What’s Included
- ADAM Audio Sub15 active studio subwoofer
- Power cord
- User manual
