$2,799.00

  • Online Stock In Stock
  • Updating stores stocks...
Price Match

Shipping cost

Note: final shipping cost may vary depending on cart items or stock availability.
Postcode
Qty

Overview

Munro Sonic EGG100

The Munro Sonic EGG100 is a compact 4″ passive monitoring speaker setup with amplifier. Featuring the same revolutionary, curved, infinite baffle design concept as its big brother the EGG150. These monitors are housed in a smaller chassis with a 4″(100mm) LF driver.

This new system has been designed for greatest accuracy in near-field conditions, taking into account the fact that it will be used on consoles or flat surfaces. The frequency response is continuously adjustable to allow for the bass loading that can add up to 6dB to the sound level. The bass port is angled and placed as low as possible to take advantage of this effect without phase error.

Near-field monitors should, by definition, remain unaffected by room size and acoustic conditions but this is rarely the case. Typically, small, rectangular cabinets and a horizontal focus plane create diffraction and reflections that interfere with both frequency and phase, both of which adversely affect stereo imaging and mix accuracy. The EGG100 has a variable tilt base that allows perfect adjustment of the upward angle of the listening axis, so avoiding interfering reflections from the mixing console or desk surface.

This has enabled us to make a supremely efficient speaker system – the phase coherent bass energy results in up to 6dB low frequency headroom – which means they pack a lot of punch for such small speakers. You’ll be amazed!

The system comes complete with a separate control unit and amplifier which features passive analogue crossovers, LF and HF trim pot EQ for location set-up, and a superb Class-A headphone amplifier, which alone is worth the cost of the control unit.

The Munro Sonic EGG100, as with all product their, is designed and manufactured in the UK by Munro Acoustics and Sonic Distribution and BS EN ISO 9001:2000 certified. The result is an exceptionally well-built, elegant and sonically purist piece of wholly British engineering.

  • Unique monocoque shell construction (rigid and resonant neutral)
  • Near zero diffraction interference (smooth frequency response)
  • No internal standing waves (greatly reduced smearing)
  • Perfect bass port integration (superb transient response)
  • Free standing control unit and integrated amplification with 3m matched speaker cables
  • Volume Level control and LED headroom indicator
  • Class-A headphone amplifier
  • Custom-designed speaker holder for adjustable vertical alignment (allows for perfect sweet spot in both vertical and horizontal planes)
  • Precision trim pots for bass (LF) and High Frequency (HF) calibration

Spec

EGG Speakers

  • EGG-shaped passive monitor speakers made with a unique monocoque shell construction (rigid and resonant neutral)
  • Near zero diffraction interference (smooth frequency response)
  • No internal standing waves (greatly reduced smearing)
  • Perfect bass port integration (superb transient response)
  • Bass reflex speakers with 70Hz QB4 front port alignment
  • Speaker effective internal volume: 14 Litres
  • 25mm HF unit –  sensitivity 95dB SPL for 1W at 1m
  • 100mm LF unit – sensitivity 86dB SPL for 1W at 1m
  • Thermal tweeter protection with automatic cut out and reset
  • Custom designed Nests for the speakers to sit in with adjustable vertical alignment (allows for perfect sweet spot in both vertical and horizontal planes)
  • Speaker dimensions are 35cm height x 24cm width x 23cm depth. Each speaker weighs 3.07kg

 

Custom-Designed Amplifier Control Unit

  • Stereo active control unit – A half-U width by 2U height
  • Two 30W RMS power amplifiers
  • THD+N 0.03% per channel
  • S/N ratio is 97dB at 1W
  • Dynamic range is 112dB at 30W
  • Two way passive crossover at 3.0kHz
  • Our own unique-design Class A headphone amp with 1W output and ultra-low distortion
  • Controls for Power, Volume, LF and HF precision trim pots (for each channel)
  • Power LED and headroom indicator LED
  • 2 x balanced XLR input 2 x Speakon output (2 x 2m Speakon to Speakon cable included)
  • Amp dimensions are 39cm width x 31cm depth x 18cm height. The amp weighs 5.6kg

Manufacturer

For more information, please visit the manufacturer's website.

Reviews