LD Systems XS700 PA Power Amplifier (OPEN BOX)

$399
SKU: BS-1094478 Categories: , ,

B-Stock Condition Report

Condition: Unit has a fair amount of scratches and marks Original Box: No
Comments: Accessories: No cables or accessories

LD Systems XS700

The LD Systems XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations. The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.

Discontinued

Discontinued Products

Please note: This product has been discontinued.

Seen a cheaper price elsewhere?
We'll match it!
Price Match
Price Match
Shipping Calculator
Pay in 4 interest-free payments of $. More info
Pay /mth for 12 months interest free. Fees apply.

LD Systems XS700

The LD Systems XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations.

The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay.

The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz – 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.

  • High quality effecient Class-D amplifier
  • Outputs 2x 350W into 4Ω
  • Full range frequency response
  • Lightweight and slimline design
  • Built-in protection circuits for added safety
  • Designed and engineered in Germany

Product number: LDXS700

Product type: Power Amplifiers

Type: PA Power Amplifiers

Rated ouput power (1kHz):

  • 2 x 350W (4Ω)
  • 2 x 200W (8Ω)
  • 700W (Bridged, 8Ω)

Output circuitry: Class D

Frequency response: 20Hz – 20kHz

THD: < 0.1 %

Gain: 36 dB / 27 dB / 31 dBdB

Input sensitivity: 0.6 V / 1.7 V / 1.1 VV

Protection circuits: DC, soft start, over-current, thermal overload, short circuit

Controls: volume, Gain, On / Off, ground lift, limiter, mode

Indicators: Power, mode, signal, clip, protect (protection circuit engaged)

Line inputs: 2

Line input connectors: RCA, 6.3 mm Jack

Loudspeaker outputs: 2

Speaker output connections: Speakon compatible, Terminal posts

Cooling: low-noise fan

Operating voltage: Switching Power Supply, 115 V AC / 230 V AC (switchable)

Power consumption @ full load: 860W

Dimensions: 482 x 44 x 244mm

Weight: 4kg

For more information, please visit the manufacturer's website.