LD Systems DDQ10 10″ PA Powered PA Speaker 1600W with DSP
Overview
The LD Systems DDQ 10 is an extremely high-performance 2-way powered speaker for compact systems, FOH and monitor applications, delay lines, and permanent installations. The groundbreaking design and comprehensive features with leading components ensure superior performance in its class.
The DDQ 10 is loaded with a 10 Faital Pro PR300 neodymium woofer and a BMS tweeter. The asymmetrical tweeter horn offers optimal, even sound level distribution from the very first to the very last row of the audience. Its design ensures extraordinarily dynamic, linear reproduction up to 20 kHz. The two drivers are powered separately by two Class D Hypex UCD400 power stage modules with an output of 400W RMS each. They have a load-controlled, linear frequency response and extremely low total harmonic distortion with extremely low noise and, thanks to their switching power supply, maximum efficiency. The maximum sound pressure level of the DDQ 10 is 132dB with a dispersion angle of 80° x 60°; the horizontal sound distribution is characterized by extraordinary symmetry.
The input, link, and switchable subwoofer output of the DDQ 10 take the form of XLR sockets. A ground lift switch eliminates ground loop hum, and the system functions are indicated by LEDs.
- Engineered and made in Germany
- On-board Sharc DSP
- Crystal Clear audio even at maximum volume
- Fatial Pro Drivers
- Ultra compact and styish design
- 2x 400W (RMS) Class-D Hypex Amps
- Ultralight 15.5kg
- Touring Sound Performance
Spec
Product number: | LDDDQ10 |
---|---|
Design: | DSP controlled |
Low/mid driver size: | 10-Inch |
Low/mid driver voice coil: | 2.5-Inch |
Tweeter dimensions: | 1-Inch |
Dispersion (H x V): | 80 x 50° |
Amplifier: | 2 x Class D, Hypex Ucd400 |
Power RMS: | 800W (2 x 400W) |
Frequency response: | 59Hz – 20kHz |
Max. SPL (continuous): | 119.5 @ 100 – 10.000 HzdB |
Max. SPL (peak): | 132*dB |
Protection circuits: | RMS power supply limiter, RMS speaker limiter, over voltage, DSP-based “look ahead” limiter, over-current |
Controls: | X-Over Sub, ground lift, Gain, mains switch (on/off) |
Indicators: | signal, X-Over Sub, Peak Limit, Operate |
Inputs: | 1x XLR |
Outputs: | 2x XLR |
Operating voltage: | 180 – 264 V AC, 47 – 63 Hz |
Cabinet material: | 15 mm Birch Plywood |
Cabinet surface: | Polyurethane |
Cabinet construction: | vented |
Dimensions: | 300 x 520 x 350mm |
Weight: | 15.5kg |