Laserworld Tarm 2.5 FB-4
The Laserworld Tarm 2.5 FB-4 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2’700 mW after optics. Boasting great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 1.0 mrad (full angle). It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1’500 mW / 450 nm) diode laser source.
Fitted with a Pangolin FB-4 ILDA interface for direct connection and control with Quickshow or Beyond laser software. The FB-4 also supports a microSD card for stand alone triggering of your saved laser shows via DMX or ArtNET, allowing you to easily integrate your projector into your lighting show without having to have a separate control system.
The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as an upgrade available: CT-6210H scanners incl. RTI RayScan driver with 60 kpps@8° ILDA and a max. scan angle of 68° (@35 kpps).
This show laser light can be controlled via ILDA. It has a switchable scan safety and switches for x-axis and y-axis flip. Colour intensity can be adjusted with trim pots per colour channel.
The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals
- 2’700 mW guaranteed output power
- Ultra smooth graphics from the 45 kpps scanners
- Pure diode RGB laser with analog colour mixing
- Capable of pure white colour
- Impressive beam spec with 1.0 mrad divergence
- Low power consumption
- Integrated FB-4 ILDA interface for direct connection to Quickshow or Beyond
- Adjust colour via FB-4 interface
- Trigger saved ILDA shows via ArtNET or DMX
- Fitted with RJ45 safety switch port, on/off key, and scan safe guard
Guaranteed power at aperture: 2’700 mW
Power Red: 700 mW / 638 nm
Power Green: 750 mW / 520 nm
Power Blue: 1’500 mW / 450 nm
Beam Specifications (full angle): ca. 3.5 mm / <1.0 mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA
Scanner: 45 kpps@8° ILDA; optional as upgrade: CT-6210H incl. Rti RayScan driver: 60 kpps@8° ILDA, max. 68° (@35 kpps).
Scan Angle max.: max. 45° (@30 kpps)
Accessories: power cable, manual, key, interlock connector
Power Supply: 85 V – 250 V / AC
Power Consumption: 100 W
Dimensions: 220 x 220 x 150 mm
Weight: 7 kg